Grand Mesa, Uncompahgre and Gunnison National Forests · Colorado

Hunters Creek

2.7 mi of trail, end to end · native material surface · trail No. 9410 · trail class 3 · typical grade 8-10% · tread 18-24 inches wide · hiking, bike, motorcycle, e-bike · motorized use allowed

Begins at the forest's mile 0, 38.9141, -106.7832 - no trailhead mapped Drive to where the trail begins

Cement Creek #612 the Forest Service's write-up

season June to October

The Cement Creek Trail #612 begins at Cement Creek Road, FSR #740 and ends at an intersection with the Hunters Creek Trail #410. This is a pretty popular trail and can be busy during the summer months. The trail follows Cement Creek for its entire length and can provide access to several other trails such as Waterfall Creek Trail #555 and the Block and Tackle Trail #545. It begins to climb in elevation and becomes a little steep near the end; from here you can look back into the valley where the trail began. Ahead, Crystal Peak, Mt. Tilton, and Lambertson Peak are visible in the distance.

Geo-Ref Trail Map Geo-Reference Instructions

Restrictions Open to Hiking, Horseback, Mountain Bike, and Motorcycle

This hike on fs.usda.gov

Hunters Creek #410 the Forest Service's write-up

season June to September

The Hunters Creek Trail #410 begins at on Forest Service Road 740, Cement Creek Road, and ends at an intersection with the Doubletop Trail #405. Sections of this trail are mixed with rocks and roots and there are a few stream crossings. This trail follows along a creek as it climbs through a draw to intersect the Doubletop Trail. Those biking the trail my chose to start at the Doubletop end for a nice intermediate descent.

Geo-Ref Trail Map Geo-Reference Instructions

Restrictions Open to hiking, horseback, mountain bike, and motorcycle.

This hike on fs.usda.gov

Every trail in Grand Mesa, Uncompahgre and Gunnison National Forests

All 762 trails in Grand Mesa, Uncompahgre and Gunnison National ForestsFind a trailForest on fs.usda.gov

About this trail's facts

The lines are the US Forest Service's National Forest System trails layer (public domain), read 2026-10-16 and simplified for the map; the length is the line's, end to end, and the class, surface, grade and tread width are the forest's own entries where it publishes them - a forest that publishes the centreline alone has none. The trailheads and the points along the way are the Service's recreation points, and the write-ups its own recarea text, unedited. Heights come from USGS 3DEP through Terrain Tiles on AWS (Mapzen/Tilezen), read along each line and rounded; a short trail on steep ground can be off by a few tens of feet. Closures change: check the forest's own site before you go.